The SK-ACPE Advanced Control Panel is a highly sophisticated, yet simple to use, two-door access control unit. The SK-ACPE is the new version of the legendary SK-ACP, featuring built-in Ethernet, improved surge suppression, more transaction storage and a faster 32-bit ARM Cortex RISC Processor. The unit accepts readers that have a Wiegand output with almost any card technology. Each of the two doors controlled by the unit is completely independent of the other and is configured, programmed and viewed separately. Each door has a separate node address. Each door has two programmable inputs which may be programmed to function as a door open, remote inactive, door monitor, tamper, arming circuit, door unlock, or user
defined input.
Each door has two outputs. One output is the relay that activates the door-operating device. The other output is programmable to activate under one of many possible alarm conditions, time zone or card violations.
As a stand alone, the unit may be programmed using a PC either locally or via a modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer.
SK-NET™ Access Control Software is an easy-to-use Windows®-based program for managing SK-ACPe or NOVA.16 control panels. The SK-NET-DM basic software controls up to 200 doors using RS-485, and it also allows a single TCP/ IP connection. SK-NET™-MLD Multi-Location Software is required for dial-up modem use or multiple TCP/IP connections, and allows an unlimited number of locations or Secura Key panels to be connected via TCP/IP. SK-NET-MLD features fully integrated ID badging software.
eAccess Kits Complete 2-Door Kits with eTag Technology (HF)
- eACCESS1Starter Kit w/ SK-ACPE, Two e*Tag® Mullion Readers (ET-RO-W-R), Software, RS-232E cable, DC Supply, 25 ETCI04 Cards
- eACCESS2Starter Kit w/ SK-ACPE, Two e*Tag® switchplate Readers (ET-WXS), Software, RS-232E cable, DC Supply, 25 ETCI04 Cards
- eACCESS3Add-On Kit w/ SK-ACPE, Two e*Tag® Mullion Readers (ET-RO-W-R), DC Supply
- eACCESS4Add-On Kit w/ SK-ACPE, Two e*Tag® switchplate Readers (ET-WXS), DC Supply
- eACCESS5Starter Kit w/ SK-ACPE, Two e*Tag® Mullion Readers (ET-RO-W-R), Software, RS-232E cable, DC Supply (no cards)
- eACCESS6Starter Kit w/ SK-ACPE, Two e*Tag® switchplate Readers (ET-WXS), Software, RS-232E cable, DC Supply (no cards)
SK-ACPe Readers (HF) eTag Smart Card Readers with Wiegand Output (Use with SK-ACPe Only)
- ET-RO-W-R (Replaces the ET8-RO-W-M)e*Tag® Contactless Smart Card Reader, 13.56 MHz, Mullion, Rectangular, Black
- ET-WXM (Upgraded version and direct replacement for the ET4-WXM)Mini-Mullion Style HF Reader/Writer, Mifare Compliant
- ET-WXS (Replaces the ET4-WXS)Switchplate style HF Reader/Writer, Mifare compliant
- ET9-RO-W-MRe*Tag® Contactless Smart Card Reader, 13.56 MHz, Mid-range, Black
Software
- SKNETDMBasic SK-NET™ Software w/ Disk & Manual (allows 1 TCP/IP connection)
- SKNETMLDSK-NET™ w/ Multi-Location, Dial-Up and multiple TCP/IP connections
- SK-NET-MLD-CS2SK-NET™ Multi-Location Client/Server License For 2 Users, includes ID Badge Printing Capability
- SK-NET-MLD-CS5SK-NET™ Multi-Location Client/Server License For 5 Users, includes ID Badge Printing Capability
- SK-NET-MLD-CS10SK-NET™ Multi-Location Client/Server License For 10 Users, includes ID Badge Printing Capability
- SK-NET-MLD-CS15SK-NET™ Multi-Location Client/Server License For 15 Users, includes ID Badge Printing Capability
- SK-NET-MLD-UPGRADEUpgrade an existing SK-NET-MLD to latest version (must include serial number from customer’s current software)
Accessories RK-WM, RK-WS, RKDT-WM, RKDT-WS
Communication Accessories
- NETCONVDB-9 Female RS-232 to RS-422/485 Conv. without Power Supply
- NETCONVPDB-9 Female RS-232 to RS-422/-485 Conv. w/ Power Supply (Req when computer is >100’ From SK-ACPE, SK-MRCP or 28SA+)
- SK-ACP-CONComplete set of connectors for SK-ACP(E)-PCBA
- SK-LANTCP/IP External Device Server with Power Supply. Use with older SK-ACPs. (Not used with SK-ACPE).
- SK-LAN-230INTERNATIONAL ONLY-TCP/IP External Device Server w/Power Supply. Use with older SK-ACPs. (Not used with SK-ACPE).
- SK-LAN-MODSerial-to-Ethernet adapter, plugs into SK-ACP New Revision. 1,2 (Not used with SK-ACPE)
- SK-PLUG9DB9 Female 6" Pigtail Computer Connector (for computers with COM port or SK-USB)
- SK-USBUSB-to-Serial Converter (For Computers without a COM Port)
- SK-WIO-1Single-door interface, RS-485, Wiegand Input, use with SK-MRCP, fits in US J-Box
- SK-WLSE-MOD802.11 b/g LAN interface, plugs into CPU board at J12, use with SK-MRCP or SK-ACPE
- SKMDM56K Baud External Modem with Power Supply (Requires SK-NET-MLD software) Use with SK-ACPE or SK-MRCP.
- SKQUICKCONNDB9 to RJ11 6’ cable - Laptop to SK-ACP or 28SA+ (not used with SK-ACPE)
Card Options Include SLOT, PHOTO FLAP, MAG STRIPE, CUSTOM ARTWORK, SIG-PANEL, BARCODE
- ETAT03Adhesive Tag, Encrypted Wiegand Data
- ETCI04ISO Cards, Encrypted Wiegand Data. SecuraKey Logo standard, plain white/glossy is available
- ETCI04-PK25Pack of 25 e*Tag® cards, pre-encoded facility code and sequential numbers
- ETKT03Bullnose Key Tag, Encrypted Wiegand Data
- ETST03Compact Key Tag, Encrypted Wiegand Data
- ETST03-PK25Pack of 25 e*Tag® key tags, pre-encoded facility code and sequential numbers
Credentials
- Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code and Card ID Number range
- Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE
- Prepackaged card/tag sets do not allow choice of facility code or card ID numbers
- Minimum Standard SecuraKey card/tag order is 50 pieces
- IF Custom Printing the Minimum Card order is 250 cards
- Cards AFTER Minimum Order must be ordered in increments of 25 (i.e.: 100, 125, 150, etc)