Secura Key’s new NOVA.16 multi-reader access control panel, based on a powerful 32-bit RISC processor, provides a major technology upgrade to Secura Key’s legacy SK-NET™ system.
The NOVA.16 introduces a new more efficient architecture for the SK-NET™ system. Each panel connects to the local area network using its built-in Ethernet connection, and it also connects to a high speed, RS485 peripheral network which supports up to 16 Smart Readers, each controlling a single door or gate. (NOVA.16’s can also be interconnected using the RS-485 Command Bus). The Peripheral Network can extend up to 4000 feet away from the controller. The NOVA.16’s RS-485 communications lines are protected with gas discharge tube surge suppressors, which helps keep systems running in areas with extreme weather conditions and power problems. By reducing the number of control panels required for multidoor systems, plus the associated cost of providing electrical outlets, space and power supplies for those panels, the NOVA.16 provides a huge savings in installation time and cost. The NOVA.16 boasts a 3-Amp heavy-duty power supply with power line noise filtering and resettable thermal fuses. It continually monitors backup battery status. Communications speeds and transaction storage capacity have more than doubled over previous controller models.
SK-WIO-1 Wiegand Interface is designed to connect Wiegand output devices, such as long range card readers (RK-WL), keypads (SK-KPM/S) and biometric readers and non-Secura Key readers to the Peripheral Bus of Secura Key’s NOVA.16 Access Control Panel. (It will also work in any system using Secura Key’s SR Protocol over an RS-485 bus.) It receives data and power from the NOVA.16 panel, and has all the input and output connections for a controlled door or gate, including a Wiegand Input, latch and aux relay outputs, and two “alarm” inputs (for REX, Door Monitor, etc.)
SK-NET™ Access Control Software is an easy-to-use Windows®-based program for managing NOVA.16 control panels. The SK-NET-DM basic software controls up to 200 doors using RS-485, and it also allows a single TCP/ IP connection. SK-NET™-MLD Multi-Location Software is required for dial-up modem use or multiple TCP/IP connections, and allows an unlimited number of locations or NOVA.16 panels to be connected via TCP/IP. SK-NET-MLD features fully integrated ID badging software.
ACCESS CONTROL KITS
Secura Key offers SK-NET™ with NOVA.16 control panels in a variety of specially-priced 4-door access control kits, which include the SK-NET basic software and manual, a NOVA.16-LE control panel, a power supply, and four smart readers. The NOVA.16 4-Door Kits feature either e*Tag® contactless smart card technology, or Radio Key® proximity technology. The kits include everything you need to control access to four doors except for cabling and door locking devices.
NOVA16 Kits (LF) Complete 4-Door Kits with RadioKey (RK-x) Technology
NOVA16 Kits (HF) Complete 4-Door Kits with eTag Technology (Add HF Credentials)
NOVA16 Panels Multi Door Access Control – Expand up to 16 Doors (NOVA16)
NOVA.16 Readers (LF) SMART READERS – Use with NOVA16 (SK-MRCP)- RadioKey (RK-x) Technology
NOVA.16 Readers (HF) Smart Readers- Use with NOVA16 (SK-MRCP) eTag (ET-x) Technology
Credentials (LF)
- Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code and Card ID Number range
- Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE
- Prepackaged card/tag sets do not allow choice of facility code or card ID numbers
- Minimum Standard SecuraKey card/tag order is 50 pieces
- IF Custom Printing the Minimum Card order is 250 cards
- Cards AFTER Minimum Order must be ordered in increments of 25 (i.e.: 100, 125, 150, etc)
Card Options Include SLOT, PHOTO FLAP, MAG STRIPE, CUSTOM ARTWORK, SIG-PANEL, BARCODE
- RKCI02ISO Proximity Cards, Imageable, Sequentially Numbered w/ Facility Code (minimum order 50)
- RKCIH02Same as RKCI02, ISO Compliant Proximity cards, encoded with HID Format 1 (minimum order 50) USE WITH RKDT READERS ONLY
- RKCM02Molded “Clamshell” Cards, Sequentially Numbered w/ Facility Code (minimum order 50)
- RKCM02-PK25Pack of 25 molded cards, 26-bit, pre-encoded facility code and sequential numbers
- RKCMH02Same as RKCM-02, encoded with HID Format 1 USE WITH RKDT READERS ONLY
- RKKT02Key Tags, Black Plastic, Sequentially Numbered w/ Facility Code (minimum order 50)
- RKKT02-PK25Pack of 25 key tags, 26-bit, pre-encoded facility code and sequential numbers
- RKKTH02Same as RKKT02, encoded with HID Format 1 (minimum order 50) USE WITH RKDT READERS ONLY
- RKST02LF Trapezoidal Key Tag, Sequentially Numbered w/ Facility Code (minimum order 50)
- RKSTH02LF Trapezoidal Key Tag, HID Format, Sequentially Numbered w/ Facility Code (minimum order 50) USE WITH RKDT READERS ONLY
- SK-IDL-100Pack of 100 - 20 mil PVC Field Printable Adhesive Labels (Dye-sub printable, use with RKCM01, RKCM02)
RKCM, RKCI, RKKT, RKST credentials are all available in HID formats:
SK Format 701
- HID® Format H10301
- SIA Standard 26-bit Wiegand
SK Format 702
- HID® Format N10002
- Honeywell/Northern 34-bit Wiegand
SK Format 703
- HID® Format H10304
- HID® 37-bit Wiegand with Facility Code *
SK Format 704
- HID® Format H10302
- HID® 37-bit Wiegand, no Facility Code *
*HID 37-bit format is not compatible with SecuraKey systems
Credentials (HF)
- Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code and Card ID Number range
- Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE
- Prepackaged card/tag sets do not allow choice of facility code or card ID numbers
- Minimum Standard SecuraKey card/tag order is 50 pieces
- IF Custom Printing the Minimum Card order is 250 cards
- Cards AFTER Minimum Order must be ordered in increments of 25 (i.e.: 100, 125, 150, etc)
Card Options Include SLOT, PHOTO FLAP, MAG STRIPE, CUSTOM ARTWORK, SIG-PANEL, BARCODE
- ETAT03Adhesive Tag, Encrypted Wiegand Data
- ETCI04ISO Cards, Encrypted Wiegand Data. SecuraKey Logo standard, plain white/glossy is available
- ETCI04-PK25Pack of 25 e*Tag® cards, pre-encoded facility code and sequential numbers
- ETKT03Bullnose Key Tag, Encrypted Wiegand Data
- ETST03Compact Key Tag, Encrypted Wiegand Data
- ETST03-PK25Pack of 25 e*Tag® key tags, pre-encoded facility code and sequential numbers
Software (SK-NET-xx) for the SK-ACPe and the SK-MRCP Multi Door Systems
- SK-NET-MLD-CS10SK-NET™ Multi-Location Client/Server License For 10 Users, includes ID Badge Printing Capability
- SK-NET-MLD-CS15SK-NET™ Multi-Location Client/Server License For 15 Users, includes ID Badge Printing Capability
- SK-NET-MLD-CS2SK-NET™ Multi-Location Client/Server License For 2 Users, includes ID Badge Printing Capability
- SK-NET-MLD-CS5SK-NET™ Multi-Location Client/Server License For 5 Users, includes ID Badge Printing Capability
- SK-NET-MLD-UPGRADEUpgrade an existing SK-NET-MLD to latest version (must include serial number from customer’s current software)
- SKNETDMBasic SK-NET™ Software w/ Disk & Manual (allows 1 TCP/IP connection)
- SKNETMLDSK-NET™ w/ Multi-Location, Dial-Up and multiple TCP/IP connections