Software Downloads
SOFTWARE DOWNLOADS
Release of the SK-NET 5.35 (SKNet.exe) software
SK-NET 5.35 continues to require version ADS 10 and above.
Changes from version 5.34 to version 5.35:
- Added support for the eTag smart readers
- Added support for wireless readers and SK-HUB
- Added firmware version 3.24 (U1) and 1.26 (U2) for the SK-ACPE firmware download in the installation setup
- Added firmware version 1.10 for the SK-MRCP firmware download in the installation setup
- Fixed HIK interface when using both TCP/IP and Analog cameras
- Added auto reconnect to a gateway when the connection is temporarily lost
- Corrected socket error when running the TCP/IP connection wizard after a TCP/IP connection was previously made
PLEASE READ BEFORE UPGRADING
With Secura Key access control systems basic software upgrades are always free. We recommend updating SK-NET™ if you need newly added features or if you are experiencing problems with your current version on your computer. To update your system to the latest release, follow these simple instructions.
NOTE: SK-Net-MLD (multi-location, LAN, Dialup). If your current software is the MLD version, you will need to go to Help, Upgrade system, and enter the 16 digit license number located on the inside cover of your SK-NET manual. Entering the license number will activate the MLD software until the activation key is entered. If the activation key is not entered within 30 days SK-NET will revert to basic mode of operation. If you are updating from a previous version of SK-NET MLD you will need to obtain a license key from Secura Key prior to using SK-NET MLD. Note that an upgrade fee applies for SK-NET MLD, please contact Secura Key for details.
New Installation of Version 5.35
During the installation, you will be prompted to run the Database Migration Tool. For a completely new installation make sure the check box is UN-checked and click on Finish to complete your installation.
• Click on Download.
• On the “File Download” screen, select option to “Save this program to disk” and click OK.
• On the “Save As” screen, select folder on your hard drive (for example: C:Temp) and click Save.
• When the “Download Complete” screen appears, click Open Folder.
• Double clicks the downloaded file to start the installation.
• When prompted, select the desired SK-NET Language.
• The Default User Name for SK-NET™ is ADMIN and Password is 12345.
IMPORTANT: Make sure you select the correct version of SK-NET™ for your operating system.Microsoft Windows® XP and above (40MB):
* Download is the same for English, Dutch, German, French, Spanish, Portuguese and Italian
Other Software Downloads
RK Link™ Version 2.20
RK-LINK™ Version 2.20 is compatible with Radio Key® 600, Firmware Version 4.5 or 5.5 or greater. (RK-LINK Version 2.20 is for the latest version of Radio Key WITH PIN ENTRY)
Download Instructions
1. Download the file to your local hard drive
2. Exit all open applications (recommended)
3. Browse to and double-click the downloaded file (RkLnk220.exe) to start the installation process.
4. The installer will launch. Follow the on-screen instructions to completion.
RK Link™ Version 1.33
RK-LINK™ Version 1.33 is compatible with Radio Key 600, Firmware Version 4.1 and 5.1.
(RK-LINK Version 1.3 is for the older version of Radio Key WITHOUT PIN ENTRY)
Single File Download Instructions
1. Download the file to your local hard drive
2. Exit all open applications (recommended)
3. Browse to and double-click the downloaded file to start the installation process.
4. The installer will launch. Follow the on-screen instructions to completion.
Multiple File Download Instructions
1. Download all files into the same directory on your local hard drive
2. Exit all open applications (recommended)
3. Browse to and double-click file 1, insert an empty formatted floppy diskette into drive A, then click unzip to extract all files into floppy diskette.
4. Repeat step 3 for file 2 .
eTag® Host
eTagHost® is a demonstration tool for Secura Key’s RFID eTag® Readers.
How to Perform a Firmware Upgrade on an e*Tag®V Reader
Single File Download Instructions
1. Download the file to your local hard drive
2. Exit all open applications (recommended)
3. Browse to and double-click the downloaded file to start the installation process.
4. The installer will launch. Follow the on-screen instructions to completion.
eTag® 4 & 9 USB Drivers
USB drivers for the eT4-AUS-D-VCP, eT4-AUM-VCP, Micro Reader and eT9-USB
Download Instructions
1. Download the file to your local hard drive
2. Exit all open applications (recommended)
3. Browse to and double-click the downloaded file to start the installation process.
4. The installer will launch. Follow the on-screen instructions to completion.
eT4-AUS-D-VCP
Vista | XP | Windows 7 32-bit | Windows 7 64-bit | Windows 8 64-Bit Signed
eT4-AUM-VCP
Vista | XP | Windows 7 32-bit | Windows 7 64-bit | Windows 8 64-Bit Signed
USB drivers for the Micro Reader, eT9-USB
Vista | XP | Win7 64-Bit
Lantronix Device Installer Ver. 4.4
The Lantronix Device Installer software is used to setup the SK-LAN and the SK-LAN-MOD devices (for Windows 8 , 7, Vista or XP). Click here for User Guide for the UDS 10/UDS/100. Click here for the WiPort User Guide.
ADS Database Server
Advantage Database Server version 11 & 12 installation, for SK-NET Client/Server systems. An ADS 11 or 12 license is required to download. Please contact factory for a license number.